Command Index

The following index provides links to the main reference topic for each Appliance Controller command.

Click the associated link to view information for the following authentication commands.

For an overview of authentication commands, see NAS User Authentication. To troubleshoot issues with authentication, see NAS Authentication Tips and FAQs.

Command	See...
`auth add local user`	Configure Legacy Local NAS Authentication
`auth add local group`	Configure Enhanced Local NAS Authentication
`auth add local members`	Configure Enhanced Local NAS Authentication
`auth change local password`	Configure Legacy Local NAS Authentication
`auth config ads`	Apply AD Authentication To NAS
`auth config ldap`	Apply OpenLDAP Authentication to NAS
`auth config ldapsam`	Apply OpenLDAP Authentication to NAS
`auth config local`	Configure Legacy Local NAS Authentication
`auth delete local user`	Configure Legacy Local NAS Authentication
`auth delete local group`	Configure Enhanced Local NAS Authentication
`auth delete local members`	Configure Enhanced Local NAS Authentication
`auth import keytab`	Apply OpenLDAP Authentication to NAS
`auth local convert`	Configure Enhanced Local NAS Authentication
`auth map ads group`	Apply AD Authentication To NAS
`auth map ads user`	Apply AD Authentication To NAS
`auth map sid enable`	Apply Apple OD Authentication to NAS
`auth map sid disable`	Apply Apple OD Authentication to NAS
`auth refresh`	Refresh NAS Authentication Mappings
`auth reset config`	Reset NAS Authentication
`auth show config`	Validate Authentication Configuration
`auth show local users`	View User and Group Information
`auth show local groups`	View User and Group Information
`auth show user`	View User and Group Information

Cloud-Based Analytics Commands

Click the associated link to view information for the following Cloud-Based Analytics (CBA) commands.

Command	See...
`cloudanalytics enable`	Cloud-Based Analytics
`cloudanalytics disable`	Disable Cloud-Based Analytics
`cloudanalytics tunnel access enable`	Enable Cloud-Based Analytics Remote Tunneling
`cloudanalytics tunnel access disable`	Disable Cloud-Based Analytics Remote Tunneling
`cloudanalytics proxy set`	Set a Cloud-Based Analytics Proxy Connection
`cloudanalytics proxy reset`	Remove a Cloud-Based Analytics Proxy Configuration
`cloudanalytics show`	Verify Cloud-Based Analytics Status
`cloudanalytics test`	Verify Cloud-Based Analytics Portal Availability

iSCSI Admin Commands

	Command	See...
The commands listed on the right are iSCSI Tasks and Commands for Appliance Controller 3.1.0 and later.	`iscsiadm create help`	Display Usage Information for an iSCSI Command
	`iscsiadm create manual`	Display Usage Information for an iSCSI Command
	`iscsiadm create initiator`	Create a TCP or iSER iSCSI Initiator
	`iscsiadm delete initiator`	Delete an iSCSI Initiator
	`iscsiadm add target`	Create TCP or iSER iSCSI Targets
	`iscsiadm remove target`	Delete iSCSI Targets
	`iscsiadm network`	iSCSI Network
	`iscsiadm session`	iSCSI Session
	`iscsiadm session-timeout`	iSCSI Session Timeout
	`iscsiadm show`	Show iSCSI Configurations
The commands listed on the right are iSCSI Tasks and Commands for Appliance Controller 3.0.x and earlier.	`iscsiadm add target`	Create TCP or iSER iSCSI Targets
	`iscsiadm create initiator`	Create a TCP or iSER iSCSI Initiator
	`iscsiadm delete initiator`	Delete an iSCSI Initiator
	`iscsiadm network`	iSCSI Network
	`iscsiadm remove target`	Delete iSCSI Targets
	`iscsiadm session`	iSCSI Session
	`iscsiadm session-timeout`	iSCSI Session Timeout
	`iscsiadm show`	Show iSCSI Configurations

Log Commands

Click the associated link to view information for the following log commands.

Command	See...
`log list`	View a List of All Log Files
`log view`	View a Specific Log File
`log watch`	Monitor a Log File for New Updates

NAS Commands

Click the associated link to view information for the following NAS commands.

Command	See...
`nas enable`, `nas disable`	Manage NAS Services
`nas nfs disable`	Disable NFS Services
`nas nfs enable`	Enable NFS Services
`nas nfs show`	View Active NFS Sessions
`nas nfsv4 disable`	Disable NFSv4 Services
`nas nfsv4 enable`	Enable NFSv4 Services
`nas product report`	View the NAS Product Status
`nas product status`	View the NAS Product Report
`nas reset smb interfaces [force]`	NAS SMB Interfaces
`nas rpcmountd options change`	Modify NFS rpc.mountd Options
`nas rpcmountd options remove`	Remove NFS rpc.mountd Options
`nas set smb interfaces`	Samba Tips and FAQs
`nas show smb interfaces`	Samba Tips and FAQs
`nas smb disable`	Disable SMB Services
`nas smb enable`	Enable SMB Services
`nas smb show`	View Active NAS Sessions

NAS Cluster Commands

Click the associated link to view information for the following NAS cluster commands.

For an overview of NAS cluster commands, see NAS Cluster Overview. To troubleshoot issues with authentication, see NAS Cluster Tips and FAQs.

Command	See...
nascluster add virtual ipaddr	Use the option that corresponds to your type of NAS cluster configuration: See Configure Scale-Out NAS Clusters > "Create the NAS Cluster" > "Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP", in the "[<virtual_ippaddr> ...]" section of "The parameters are" table See Configure a 2-Node active backup NAS cluster > "Create the NAS Cluster" > "Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP", in the "[<virtual_ippaddr> ...]" section of "The parameters are" table See Configure a 2-Node active backup NAS cluster with NFSv4 > "Create the NAS Cluster" >"Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP", in the "[<virtual_ippaddr> ...]" section of "The parameters are" table See Configure a Load-Balancing Cluster using haProxy (Xcellis WorkFlow Extender) > "Create the NAS Cluster" > "Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP", in the "[<virtual_ippaddr> ...]" section of "The parameters are" table
nascluster controller_mgmt interface on node	Configure the Appliance Controller Management Interface
nascluster controller_mgmt interface remove	Configure the Appliance Controller Management Interface
nascluster controller_mgmt vip assign	Configure the Appliance Controller Management Interface
nascluster controller_mgmt vip remove	Configure the Appliance Controller Management Interface
nascluster disable node	Handle NAS Cluster Nodes for Maintenance
nascluster dns balancing set	Configure the Balancing Type
nascluster dns balancing show	Show the DNS Balancing Status
nascluster dns disable	Disable DNS Load Balancing
nascluster dns enable	Enable DNS Load Balancing
nascluster dns set weight	Configure the Node Weight
nascluster enable master	Use the option that corresponds to your type of NAS cluster configuration: See Configure Scale-Out NAS Clusters > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" > "Enable NAS Cluster Nodes" See Configure a 2-Node active backup NAS cluster > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" > "Enable NAS Cluster Nodes" See Configure a 2-Node active backup NAS cluster with NFSv4 > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" > "Enable NAS Cluster Nodes" See Configure a Load-Balancing Cluster using haProxy (Xcellis WorkFlow Extender) > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" > "Enable NAS Cluster Nodes"
nascluster enable node	Use the option that corresponds to your type of NAS cluster configuration: See Configure Scale-Out NAS Clusters > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" See Configure a 2-Node active backup NAS cluster > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" See Configure a 2-Node active backup NAS cluster with NFSv4 > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster" See Configure a Load-Balancing Cluster using haProxy (Xcellis WorkFlow Extender) > "Create the NAS Cluster" > "Step 1. Enable Nodes for the NAS Cluster"
nascluster join	Use the option that corresponds to your type of NAS cluster configuration: See Configure Scale-Out NAS Clusters > "Create the NAS Cluster" > "Step 3. Join the nodes to the NAS Cluster" See Configure a 2-Node active backup NAS cluster > "Create the NAS Cluster" > "Step 3. Join the nodes to the NAS Cluster" See Configure a 2-Node active backup NAS cluster with NFSv4 > "Create the NAS Cluster" > "Step 3. Join the nodes to the NAS Cluster" See Configure a Load-Balancing Cluster using haProxy (Xcellis WorkFlow Extender) > "Create the NAS Cluster" > "Step 3. Join the nodes to the NAS Cluster"
nascluster leave	Handle NAS Cluster Nodes for Maintenance
nascluster release master	Transfer NAS Services to Another Node
nascluster reset factory-defaults	Delete a NAS Cluster (return to non-clustered state)
nascluster resync	Resync a NAS Cluster
nascluster set hostname	For Scale-out NAS clusters, see Configure Scale-Out NAS Clusters > "Assign the NAS Cluster Hostname" > " Assign the NAS Cluster Hostname"
nascluster set label <label>	Add a Label to a NAS Cluster
nascluster set master offload	Offload SMB Connections from the Master Node
nascluster set nfs-ha	For NFSv4 NAS cluster configurations with 2 active backup nodes, see Configure a 2-Node active backup NAS cluster with NFSv4 > "Enable NFSv4 Failover" > "Enable NFS Failover"
nascluster set virtual ipaddr	Use the option that corresponds to your type of NAS cluster configuration: See Configure Scale-Out NAS Clusters > "Create the NAS Cluster" > "Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP" See Configure a 2-Node active backup NAS cluster > "Create the NAS Cluster" > "Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP" See Configure a 2-Node active backup NAS cluster with NFSv4 > "Create the NAS Cluster" >"Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP" See Configure a Load-Balancing Cluster using haProxy (Xcellis WorkFlow Extender) > "Create the NAS Cluster" > "Step 2. Assign the NAS Cluster VIP" > "Assign the NAS Cluster a VIP"
nascluster show	NAS cluster show
nascluster show version	NAS cluster show version
nascluster takeover master	Use this command to failover a NAS cluster from one master node to another; for example from the primary to a secondary, or vice versa.
nascluster upgrade	Upgrade Appliance Controller Software

Network Commands

Command	See...
net nslookup <hostname \| ipaddr>	Display Host Server, Server Address, and Name
net ping [<ping args> ...]	Ping a Hostname or IP Address
net show config [all]	View the IP Addresses and Associated Information
net show hostname	View the Hostname
net show routes	View the Kernel IP Routing Table
net show status	View the Status of all Active Connections
net tcpdump start [<tcpdump argument> ...]	Start a TCP Dump to a Log File
net tcpdump stop	Stop a TCP Dump to a Log File

Share Commands

Click the associated link to view information for the following NAS share commands.

For an overview of NAS share commands, see Share Management. To troubleshoot issues with NAS shares, see NAS Share Tips and FAQs.

Command	See...
share add	Add Shares
share change	Modify Shares
share create	Use `share add` instead. See Add Shares. This command will be deprecated in a future release.
share delete	Delete Shares
share export	Export and Import Share Information
share import	Export and Import Share Information
share multi protocol locking disable\|enable	Multi Protocol File Locking Support
share refresh	Refresh Shares
share show	View Shares
share smb global reset option[,option ...]	Reset a Global SMB Option
share smb global set option[,option ...]	Set a Global SMB Option
share smb global show	Display Global SMB Options
share smb permission add	Configure a Share Permission
share smb permission replace	Configure a Share Permission
share smb permission remove	Remove a Share Permission
share smb permission reset	Reset the Permission to the Default
share smb permission show	View a Share Permission

SNMP Commands

Click the associated link to view information for the following SNMP commands.

Command	See...
`snmp authtrapenable`	Enable SNMP Authorization Traps
`snmp agent enable`	Configure SNMP Agents
`snmp agent disable`	Configure SNMP Agents
`snmp community add ro`	Configure an SNMP Community
`snmp community remove ro`	Configure an SNMP Community
`snmp notification add`	Configure SNMP Notification Directives
`snmp notification remove`	Configure SNMP Notification Directives
`snmp service enable`	Enable or Disable SNMP Services
`snmp service disable`	Enable or Disable SNMP Services
`snmp show`	View SNMP Service Configuration
`snmp sysinfo`	Define SNMP Maintenance Information
`snmp trap community`	Configure SNMP Notification Directives
`snmp view add`	Configure SNMP Views
`snmp view remove`	Configure SNMP Views

Support Bundle Commands (Log Files)

Click the associated link to view information for the following log file support bundle commands.

Command	See...
`supportbundle create`	Create a Log File Bundle
`supportbundle send`	Create a Log File Bundle and Email it to Quantum Support

System Commands

Click the associated link to view information for the following system commands.

Command	See...
`system backup`	Back Up Your System
`system restart services`	Restart the Appliance Controller
`system restore`	Restore Your System
`system show date`	View Your Appliance's Date and Time Settings
`system show software updates`	Check Upgrade Availability
`system show uptime`	View Appliance Uptime
`system show version`	View Your Current Appliance Controller Version
`system status`	View System Status
`system upgrade [local]`	Appliance Controller Upgrades

Time Commands

Click the associated link to view information for the following network commands.

Command	See...
time ntp server	Define the NTP Time Server to Use
time ntp service	Enable/Disable the NTP Service for the Server
time ntp sync	Synchronize System Time with the NTP Server/Server Pool
time set datetime	Set Server Date/Time
time set timezone	Set Server Time Zone
time show	Show Time Configuration