View System Status
You can view your Appliance Controller system's status to determine which of the following features are configured and running.

The system status
command reports on the following features.
Feature |
Description |
---|---|
|
The state of the Appliance Controller. The controller state should always be |
|
The state of the clustered trivial database (ctdb). This process manages the lock state for the SMB cluster.
|
|
The state of the smbd process.
|
|
The state of the winbind binding process.
|
|
The state of the NFS server daemon process.
|
|
The state of the haproxy process. This process is only applicable to a NAS cluster of Xcellis WFE or G300 gateways — it manages the load balancing between the cluster's nodes.
|
|
The state of the keepalived process. This process manages the VIP movement from one node to another during NAS failover.
|
|
The state of the Simple Network Management Protocol (SNMP) daemon process. See SNMP Monitoring for additional information.
|

- Log in to the Appliance Controller CLI.
- Enter:
system status all
The parameter is:
all
Enter
all
to view the status of all system services. Otherwise, only the status of the Appliance Controller is returned.
Example output:
snnas_controller: running ctdb: running smbd: running winbind: running nfs: running haproxy: disabled keepalived: running snmpd: disabled