Library Walkaround

Front

Control Module Only(3U)

Control Module with Attached Expansion Module (6U)

Item Name Description

1

Magazines Contains the slots that hold the tape cartridges. Each magazine contains 25 slots.
2 Window Allows you to view the internal components.
3 Local User Interface

Allows you to perform some library functions when you can’t access the WebGUI.

Note: The LUI is only available on a control module.
4 Mini USB Port Not used at this time.
5 Magazine Release Releases the corresponding magazine for removal.
6 Left Magazine Manual Release Allows you to release the left magazine when the library is not powered on.
7 Right Magazine Manual Release Allows you to release the right magazine when the library is not powered on.

Back

Control Module Only (3U)

Control Module with Attached Expansion Module (6U)

Item Name Description

1

System Control Board (SCB)

Controls library functions. Network ports are labeled GB1 and GB2.
2 Power Supply Provides AC and DC voltages to the library.
3 Module Interconnect

Provides connectivity from the module to the module above.
4 Drives Reads and writes data to the tape media. See Supported Drive Types.
5 Redundant Power Supply

Provides back up power should the primary power source fail.
6 Module Interconnect Indicator Indicates connectivity to the module below.
7 Cable Spool Provide robot mobility throughout the library.
8 iBlade

Two types of iBlades available:

ScalarLTFS iBlade - allows for a converged, fully integrated SLTFS environment for file management

Veeam Tape Server iBlade - allows for backups run as with any other Veeam Backup/Tape Server