Tools > Client Download
The StorNext client software lets you mount and work with StorNext file systems.
The client software can be downloaded from the the Web, or from a metadata controller (MDC) running the StorNext GUI. You can only download client software from an MDC if you have SNFS and SNSM installed and are running the StorNext GUI.
Note: LAN client and LAN client gateways are included with the standard client software packages. For more information about LAN Clients, see About StorNext LAN Clients and Gateway Server/Client Network and Memory Tuning.
In addition to StorNext client software, Distributed Data Mover can also be downloaded from this page. For more information about installing and using Distributed Data Mover, see Tools > Storage Manager > Distributed Data Mover.
Note: To ensure successful operation, before you install the client software verify that the client system meets all operating system and hardware requirements listed in the StorNext Compatibility Guide.
After downloading the client software, install and configure it using the appropriate method for your operating system.
If your StorNext server is not running the StorNext GUI, you must download client software from the Web (FTP site) in the fs_only directory.
The names of the client install files begin with snfs_client_<system>, where <system> is the name of the operating system for which the install file is intended. Copy the appropriate install file to an accessible location on your computer and proceed to the installation instructions.
To download the client software from an MDC, the client system must have network access to the MDC.
- On the client system, point a web browser to the URL (host name and port number) of the MDC. For example, http://servername:81. Use a supported browser to access the MDC (make sure pop-up blockers are turned off). See the StorNext Compatibility Guide for a list supported browsers.
- When prompted, type the username and password for the MDC, and then click OK. The StorNext home page appears.
- Choose Client Download from the Tools menu. The Tools > Client Download page appears.
- Select from the Platform list the desired operating system.
- Select from the OS Version list the desired operating system version corresponding to the platform you selected.
- When a window appears containing a link to the client software download location, click the link to begin downloading.
- Click Download to begin the process.
- When prompted, choose the Save to Disk option, and then click OK.
- Browse to the location where you want to save the file, and then click Save.
- After the client package has been saved, click Done.
- Continue with the installation procedure for your operating system as described in the following sections.