Access the QXS Disk Management Utility/GUI

The following applies to Xcellis Foundation, aiWARE for Xcellis Embedded (DAE), Xcellis Workflow Director, and Artico (R630) systems.

If your QXS Chassis controller I/O module is accessible on your network, follow the procedure below to access the QXS Disk Storage Management Utility (DMU)/GUI.

If you will be accessing the DMU with a direct connection to the network port on one of the QXS RAID Chassis controller I/O modules, and have not already set your laptop for the network running on the port, see Configure QXS Laptop Network Settings for Direct Connections first, and then use the procedure below to access the QXS DMU/GUI.

Do the following to access the DMU:

Open a web browser using the IP assigned to the correct controller on your network, or IP http://10.0.0.1 (controller A) or http://10.0.0.2 (controller B) for direct connections.
Log in to the DMU.
Login using the credentials assigned to your controller (the default values are User name: manage and Password: !manage)