Per engineering, to configure iDRAC or IPMI on the G300, you need to run the script

with the "-admin" option. You will then see the option to configure IPMI:

 

Ex:

 

[root@gw1 stornext]# /opt/DXi/scripts/service.sh

 

*** Service Menu ***

 

0) Hardware Configuration   >>> - Tools for Configuring Hardware.

1) Serial Numbers           >>> - Tools for Node and System Serial Numbers.

2) More Tools               >>> - Miscellaneous Tools.

 

Your Choice ('q' to Exit this Menu): 0

 

*** Service Hardware Configuration Menu ***

 

0) Factory Detect Hardware      - Create Factory List of Detected Hardware.

 

Your Choice ('q' to Exit this Menu): ^C

[root@gw1 stornext]# /opt/DXi/scripts/service.sh -admin

 

*** Service Menu ***

 

0) Hardware Configuration   >>> - Tools for Configuring Hardware.

1) Serial Numbers           >>> - Tools for Node and System Serial Numbers.

2) More Tools               >>> - Miscellaneous Tools.

 

Your Choice ('q' to Exit this Menu): 0

 

*** Service Hardware Configuration Menu ***

 

0) Setup IPMI               >>> - Setup the iDRAC/IPMI.

1) Factory Detect Hardware      - Create Factory List of Detected Hardware.

 

Your Choice ('q' to Exit this Menu): 0

 

*** Service Setup IPMI Menu ***

 

0) Configure IPMI - Configure IPMI network information.

1) Show IPMI      - Show IPMI network information.

 

Your Choice ('q' to Exit this Menu):