TO TUNE opHangLimitSecs…>

MDC# vi /usr/cvfs/config/ cbsi_vol_01.cfgx

Change the opHangLimitSecs parameter from 180 to 360 >>>

<snfs:opHangLimitSecs msgId="opHangLimitSecs">180</snfs:opHangLimitSecs>

:wq

Stop and start the file system with cvadmin or the GUI so that the kernel reads in your change.

Cat the cfgx file and make sure the change is there. – It will replicate to the other MDC after about 7 – 10 minutes so there is no need to change it on both nodes. Only the primary needs the change.