Initialize Element Status With Range - E7h

The library will examine the range of elements requested and determine their status relative to media presence (full or empty). Barcode labels will be scanned unless otherwise directed (and the library supports a non-barcode option). The library may not fully execute this command if the Automatic Inventory option is enabled, and element status is already known.

Results of the status initialization will be buffered by the library for retrieval via the READ ELEMENT STATUS command. Element status and barcode label information is retained by the library across power cycles.

This command can be issued to gather status for some or all of the elements, and can be used in conjunction with host application error handling if the normal element status maintained by the library returns an unexpected result. It should then be followed by a READ ELEMENT STATUS command to retrieve the status.

The INITIALIZE ELEMENT STATUS WITH RANGE CDB format is shown in the following table.

Table 1: INITIALIZE ELEMENT STATUS WITH RANGE CDB format

Bit Byte	7	6	5	4	3	2	1	0
0	Op Code (E7h)
1	Logical Unit Number			Reserved				Range
2	Starting Element Address
3
4	Reserved
5	Reserved
6	Number of Elements
7
8	Reserved
9	NBL	Control

Field	Description
Range	A value of 0 indicates that all element addresses will be checked and that the Starting Element Address and Number of Elements fields will be ignored. A value of 1 indicates that the series of elements beginning at the specified Starting Element Address for the specified Number of Elements will be checked.
Starting Element Address	The Starting Element Address specifies the beginning address of the range to check. It must be a valid address for an element that exists within the library; no adjustment will be made to convert to a next higher valid address. This field is ignored if the Range field is 0.
Number of Elements	This field specifies the number of elements to check. Gaps in element types and addresses are automatically handled until a quantity of physical elements equal to this number has been checked. If this field is 0, the range checked will start with the Starting Element Address and continue through all remaining elements. This field is ignored if the Range field is 0.
No Barcode Labels (NBL)	A value of 0 indicates that the specified elements will be checked for all relevant status, including bar code labels. A value of 1 indicates that elements will be checked for media presence only (no bar code labels). Note: Tape libraries that have barcode label scanners/readers installed will always establish barcode label element status, regardless of the NBL bit setting.