Install Vision onto a Windows-Based Server

Use the Vision standard installation software package for Windows-based servers. After you have completed the installation wizard, set up and configure your Vision software.See Vision Setup and Configuration.

  1. Download the Vision installer file vision-<x>-windows-installer.exe, or insert the media with the installer file into the appropriate drive of your Vision server.

  2. Browse to the location of the installer file.

  3. Double-click the file to display the Quantum Vision Setup Wizard.

    Figure 1: Quantum Vision Setup Wizard

  4. Click Next to display the License Agreement window.

    Figure 2: License Agreement Window

  5. Select I accept the agreement and click Next to display the Installation Directory window.

    Figure 3: Installation Directory Window

  6. In the Installation Directory field, edit the location in which to install the Vision software as needed, and click Next to display the Product Serial Number window.

    Figure 4: Product Serial Number Window

  7. In the Serial Number field, enter your Vision serial number as needed, and click Next to display the Vision Ports window.

    Figure 5: Vision Ports Window

  8. In the Port fields, edit the ports that Vision will use as needed, and click Next to display the Ready to Install window.

    Note: You can change your network ports using Vision's Security feature. When using this feature to change ports, check your existing firewall configuration to ensure that the appropriate firewall ports are open.

    Figure 6: Ready To Install Window

  9. Click Next to start the installation.

    The setup wizard installs the software, initializes the database, and starts Vision. When the setup wizard is finished, the Completing the Quantum Vision Setup Wizard window displays.

    Figure 7: Completing the Quantum Vision Setup Wizard Window

  10. Select the Vision is a web based application, open the application after installation? check box to launch Vision after the setup wizard is closed.
  11. Click Finish to close the setup wizard.
  12. Continue with the Vision setup. See Vision Setup and Configuration.