Port Configuration
This topic provides information about the ports used by various components and processes.
In general, you can configure the protocols below as follows to secure your environment.
- HTTP, HTTPS: Enabled; Quantum recommends you review the following sections for proper configuration.
- SSH: Enabled; Quantum recommends you review the following sections for proper configuration.
- Telnet: Disabled
The following table lists ports that are used by StorNext and its ancillary components.
Port |
Protocol |
StorNext Use |
Notes |
81 |
TCP |
GUI (Java), |
User starts at port 81, redirected to 443 |
443 |
TCP |
GUI (Java), |
|
1062, 1063 |
TCP |
Blockpool |
Both ports if HA primary |
1527 |
TCP |
GUI (Java connection to derby db) |
|
3307 |
TCP |
GUI (Java connection to MySQL) |
|
5164 |
TCP |
fsmpm |
This is the TCP port for the StorNext file system alternate portmapper. See the fsports(4) man page for information on changing the default setting. |
5189 |
TCP |
HA Manager |
|
14500 |
TCP |
snpolicyd |
|
14510, 14511 | TCP | DDM | |
20566 |
TCP |
MySQL |
Only used internally on an MDC. |
60001, 60002 … |
TCP |
ACSLS Tape Libraries |
Not used by StorNext, but related |
Various |
TCP |
fsm, fsmpm |
These ports are used to for metadata exchanges between client hosts and FSM processes on the MDCs and for additional exchanges between StorNext components on hosts within the cluster. See the |
Various |
UDP |
fsmpm |
These ports are used to exchange heartbeat messages between the client hosts and the coordinator hosts. See the |
The following table lists ports that are used by StorNext Connect and its ancillary components.
Port |
Protocol |
Use |
22 |
SSH |
Connection from a Quantum appliance running StorNext Connect to a StorNext client. |
80 |
HTTP |
Connection from the Connector on a Quantum appliance or on a StorNext client to a Quantum appliance running StorNext Connect. |
442 |
HTTPS |
Connection from a browser to Quantum appliance running StorNext Connect. |
443 |
HTTPS |
Connection from a browser to Quantum appliance running StorNext software GUI. |
2004 |
TCP |
Connection from a StorNext client to a Quantum appliance running StorNext Connect. |
5163 |
TCP |
Connection from a Quantum appliance running StorNext to the Connector on a StorNext client. |
The following table lists ports that are used by Cloud Based Analytics and its ancillary components.
Port |
Protocol |
Use |
443 |
HTTPS |
Connection to the portal. |
FlexTier allows you to tier to multiple Object Store locations, both public and private; each can have different ports and configuration options. See your provider for information about which ports you can configure for use with FlexTier.
The following table lists ports that are used by Appliance Controller and its ancillary components.
Port |
Protocol |
Use |
111 | TCP | Used for rpcbind (for NFS). |
112 | Raw | Used for keepalived. |
445 | TCP | Used by the SMB server, if you have configured Samba. |
2049 | TCP | Used for nfsd (for NFS). |
10001 | TCP | Used for haproxy. |
20048 | TCP | Used for rpc.mountd (for NFS). |
33777 |
TCP |
Used by the Appliance Controller. |