Replication Traps
The following table lists Replication trap details.
RAS Ticket Help
The Online_Help_Filename column lists the service (RAS) ticket help file associated with the SNMP trap. If you are logged into the DXi remote management console, you can access the RAS ticket help file by doing one of the following:
- Enter the following path in a web browser:<dxi-hostname or IP-address>/online_help/<online_help_filename>.
- Click the View Recommended Actions link on the Ticket Details page.
Keep in mind that traps issued without a FRU do not have RAS ticket help files associated with them, including all Information traps and certain Error traps.
|
FRU_ID |
Event_ID |
Trap_Level |
Trap_Details |
Online_Help_Filename |
|---|---|---|---|---|
| 0805 | 108 | Error | Replication <FRU_Inst> : Namespace replication failure | Replication.htm |
| 0805 | 133 | Error | Replication <FRU_Inst> : Trigger replication failed | Replication.htm |
| 0805 | 135 | Error | Replication <FRU_Inst> : Trigger replication message notification failed | Replication.htm |
| 0805 | 109 | Error | Replication <FRU_Inst> : Replication paused | Replication.htm |
| Information | : aud Synchronization of Partition: <vtl name> Failed. Reason: <details> | |||
| Information | : aud Failed to DB Initialization failed | |||
| Information | : aud Failed to process Delete request: <details> | |||
| Information | : aud Failed to process unpack request: <details> | |||
| Information | : aud Recovery of Synchronization Failed. Error: <details> | |||
| Information | ": aud Source notification of synchronization recovery failed for source Sync_ID: <source ip address> source IP Address:<source IP> with status: <status>" | |||
| Information | : aud Synchronization of Share: <shareName> Failed | |||
| Information | : aud: Unable to open VP Messaging | |||
| Information | <share/vtl name> Failback replication cancelled | |||
| Information | <share/vtl name> Namespace replication cancelled | |||
| Information | <share/vtl name> Namespace replication failed | |||
| Information | <share/vtl name> Namespace replication partially complete | |||
| Information | A synchronization request is already submitted for: <nodename> Target: <target> | |||
| Information | Attempt to connect to the blockpool on the source host has failed. Details: <details> | |||
| Information | Attempt to parse section line failed for <details> | |||
| Information | AUD: Failed to process <delete | unpack> request: <details> | |||
| Information | blockpoolunpackBundle(): Error in unTarAttrBallTarFile fullPath: <path to file> Error Details: <details> | |||
| Information | "Cant find partition/share with trigger ID : <trigger id>, source : <source ip>" | |||
| Information | "Cant find share with trigger ID : <trigger id>, source : <source ip>" | |||
| Information | Could not open replication <properties | status | update> file (<path to file>) for reading. | |||
| Information | Could not open replication <properties | status | update> file (<path to file>) for writing. errno: <errno> | |||
| Information | Duplicate partition name <part name> detected | |||
| Information | Duplicate partition name <vtl name> detected | |||
| Information | Duplicate share name <share name> detected | |||
| Information | Encryption Method Unsupported on Failback Target <target> for Requested Method: <encryption method> Encryption | |||
| Information | Encryption Method Unsupported on Target: <target> for Requested Method: <encrypt method> Encryption | |||
| Information | Error calling attrBall load Target: <target> Error Details: < error string> | |||
| Information | Error calling holdTagsForAttrBall for directory: Target: <target> Error Details: < error string> | |||
|
|
|
Information |
Error creating share: <share name> Details: <details> |
|
|
|
|
Information |
Error creating tar file: <tar file>. Error returned: <details> |
|
|
|
|
Information |
Error during call to SysUtil::getHostByAddr(). Details: <details> |
|
|
|
|
Information |
"ERROR Encountered during read, errno(<errno>)" |
|
|
|
|
Information |
"ERROR Encountered trying to connect to <target host>, errno(<errno>)" |
|
|
|
|
Information |
Error getting encrypt info for target: <target> Details: <details> |
|
|
|
|
Information |
Error getting replication IP: <address> Details: <details> |
|
|
|
|
Information |
Error getting seer variable: <details> |
|
|
|
|
Information |
Error getting user information for user <user name> error: <details> |
|
|
|
|
Information |
Error in AttrBall Untar target: <target> fullpath: <bundle tar file name> |
|
|
|
|
Information |
Error in createSNFS_FilesFromAttrBall newsharename: <new share name> Error reason: <details> |
|
|
|
|
Information |
Error in unTarAttrBallTarFile fullPath: <bundle tar file name> Error Details: <details> |
|
|
|
|
Information |
Error moving continuous wait tags to destination queue for target: <target> |
|
|
|
|
Information |
Error notifying target or pre-posted file of file <file> details: <details> |
|
|
|
|
Information |
Error occured removing host < target > as allowed host for replication to this system. Resolving the IP address to a fully qualified host name failed. Error details: <details> |
|
|
|
|
Information |
Error occurred during recovery process. Details: <details> |
|
|
|
|
Information |
Error occurred removing host <host> as allowed host for replication to this system. Resolving IP address to a fully qualified host name failed. Error details: gethostbyaddr failed. Returned error: <errno> |
|
|
|
|
Information |
Error querying transaction: <details> |
|
|
|
|
Information |
Error replicating tags - reason: <details> |
|
|
|
|
Information |
Error retrieving list of partitions |
|
|
|
|
Information |
Error setting encrypt info for target: <target> Details: <details> |
|
|
|
|
Information |
Error starting query transaction: <details> |
|
|
|
|
Information |
Error: database api status error: <status> |
|
|
|
|
Information |
Error: Failed to receive TRIGGERD_SYNC response from NS_TRIGGERD: <detail> |
|
|
|
|
Information |
Error: Failed to send TRIGGERD_SYNC message to NS_TRIGGERD: <detail> |
|
|
|
|
Information |
Error: synchronization request query failed for: <nodename> Target: <target> with status: <status> |
|
|
|
|
Information |
Exception during failback details: <details> |
|
|
|
|
Information |
Exception during failback to target: <target> details: <details> |
|
|
|
|
Information |
Exception during generatereports details: <details> |
|
|
|
|
Information |
Exception during recovery details: <details> |
|
|
|
|
Information |
Exception during Trigger recovery details: <details> |
|
|
|
|
Information |
Failback Replication is either cancelled or failed for node <share/vtl name> |
|
|
|
|
Information |
Failback Replication: 2.0 files to pre-2.0 target node(<target>) is disallowed |
|
|
|
|
Information |
failbackUnbundle failure. Failback Replicatio is disallowed for the current task. <details> |
|
|
|
|
Information |
Failed in determining Target <target> AttrBall version. |
|
|
|
|
Information |
Failed in determining Target <target> level of support. |
|
|
|
|
Information |
Failed in saving Target <target> level of support to configuration file |
|
|
|
|
Information |
Failed in saving Target <target> NAS support setting to configuration file |
|
|
|
|
Information |
Failed in saving Target <target> VTL support setting to configuration file |
|
|
|
|
Information |
Failed to open dir <path to file> errno(<errno>): <errno String> |
|
|
|
|
Information |
Failed to remove file: <path to file errno(<errno): <errno String> |
|
|
|
|
Information |
Failure cancelling OST requests during replication startup. Details: <details> |
|
|
|
|
Information |
Fork of command failed (<command line>) <details> |
|
|
|
|
Information |
gethostbyaddr failed. Returned error: <errno> |
|
|
|
|
Information |
getHostByName failed for hostName:<hostname>. <detail> |
|
|
|
|
Information |
inet_aton failed |
|
|
|
|
Information |
Invalid Dedup <dedup value> request, recovery failed |
|
|
|
|
Information |
Invalid Permissions <permissions>, recovery failed |
|
|
|
|
Information |
Library name exceeds maximum number of characters allowed in library name (12) <part name> |
|
|
|
|
Information |
malloc failed |
|
|
|
|
Information |
Namespace Failback Replication did not complete successfully for task: <details> |
|
|
|
|
Information |
Namespace replication aborted |
|
|
|
|
Information |
Namespace Replication did not complete successfully for : <share/vtl name> to target: <target> . <details> |
|
|
|
|
Information |
Namespace Replication FAILED for task: <details> |
|
|
|
|
Information |
Namespace Replication resulted in only partial replication. |
|
|
|
|
Information |
NAS Replication Disabled for: <shareName> because target does not support NAS replication |
|
|
|
|
Information |
NAS Replication of <share name> from source <host> failed because NAS replication to this target system is not supported |
|
|
|
|
Information |
Node <shareName> is not enabled for Directory/File Based Replication |
|
|
|
|
Information |
Node <vtlName> is not enabled for Cartridge Based Replication |
|
|
|
|
Information |
NodeType(<nodetype>) is invalid |
|
|
|
|
Information |
Not all data was submitted for replication: <details> |
|
|
|
|
Information |
Not all secondary threads replicated successfully |
|
|
|
|
Information |
Partial Partition Recovery <status info lines> |
|
|
|
|
Information |
Partial Partition Recovery. Duplicate barcodes not recovered |
|
|
|
|
Information |
Partial Partition Recovery. Recover imcomplete due to duplicate barcodes. |
|
|
|
|
Information |
Partition <partition name> does not exist in the replication configuration |
|
|
|
|
Information |
Partition Recovery failed. <details> |
|
|
|
|
Information |
Path <path> is not valid for share <shareName> |
|
|
|
|
Information |
QSRofstream close() failed on <file name> with errno: (<errno>) |
|
|
|
|
Information |
Recovery Failed or Partial Recovery |
|
|
|
|
Information |
"Recovery process halted. Details, is Running: <true|false> isPaused <true|false> pauseRequested <true|false> " |
|
|
|
|
Information |
REDaemon cannot send message to Triggerd |
|
|
|
|
Information |
REDaemon: Replication service is <paused | resumed> to target: <target> |
|
|
|
|
Information |
REDestinationThread: <target> is not resumed as the target does not support the Requested Encryption Method |
|
|
|
|
Information |
"Remove replication source, clear cont. tags: <errno>" |
|
|
|
|
Information |
Removed source host <host> from the allowed source list. |
|
|
|
|
Information |
Replication is for <target host> in this system. Number of Directory/File Based Replication requests in queue = <number of queued requests>. Adding request for: <path for request> |
|
|
|
|
Information |
Replication is paused in this system - <details> |
|
|
|
|
Information |
Replication is paused in this system. Number of Directory/File Based Replication requests in queue = <xxx>. Adding request for: <file/directory name><details> |
|
|
|
|
Information |
Replication of barcode: <barcode> for vtl: <vtl name> failed. Details: <details> |
|
|
|
|
Information |
Replication of path: <path> for share: <shareName> failed. Details: <details> |
|
|
|
|
Information |
Replication status for <share/vtl name> from host <source name> to target <target> is: not allowed. Details: <details> |
|
|
|
|
Information |
Send Namespace Replication Complete event to Target: <target> failed. |
|
|
|
|
Information |
sendContinuousTags command on target <target> failed. DETAILS <details> |
|
|
|
|
Information |
sendVpMessage - failed on Name: <partition>, Path: <path>, Trigger Id: <triggerId>, Target Host Id: <hostId> Source Host Id: <hostId> with Error: <errorString> |
|
|
|
|
Information |
sendVpMessage - failed on Name: <vtlName>,Barcode: <barcode>, Trigger Id: <triggerId>, NodeId: <vtlSerial>, Target Host Id: <hostId>, Source Host Id: <hostId> with Error: <errorString> |
|
|
|
|
Information |
sendVpMessage - failed: <details> |
|
|
|
|
Information |
Share <sharename> does not exist in the replication configuration |
|
|
|
|
Information |
Share or partition type('<nodetype>') is invalid |
|
|
|
|
Information |
Synchronization of Cartridge or Directory/File FAILED |
|
|
|
|
Information |
Synchronization Recovery Failed |
|
|
|
|
Information |
"System has paused the replication service, possible reasons: 1, Either source or target is in low space state. 2, The target is down. 3, The target becomes unavailable for replication from this source." |
|
|
|
|
Information |
System has resumed the replication service |
|
|
|
|
Information |
Tag file for bundle already exists for file: <file name> |
|
|
|
|
Information |
Target host: <hostId> is not reachable. |
|
|
|
|
Information |
TargetNASReplication cannot be configured because the target <target> does not support NAS replication. |
|
|
|
|
Information |
TargetVTLReplication cannot be configured because the target <target> does not support VTL replication. |
|
|
|
|
Information |
Unable to get list of NAS shares: <details> |
|
|
|
|
Information |
Unable to load configured target from configuration file. |
|
|
|
|
Information |
Unable to prepost bundle tag. Details: <details> |
|
|
|
|
Information |
Unable to send bundle. Details: <details> |
|
|
|
|
Information |
Unknown error occurred during recovery process |
|
|
|
|
Information |
Unreachable targetHost <target> |
|
|
|
|
Information |
Validation of file/dir replication for target <target host> failed. Details from <target host>: <reason> |
|
|
|
|
Information |
Validation of file/dir/cartridge replication for target host <hostId> failed. DETAILS from <hostId>: <details> |
|
|
|
|
Information |
VTL replication cannot be enabled because the target does not support VTL replication. |
|
|
|
|
Information |
VTL Replication Disabled for: <vtl name> because target <target> does not support VTL replication |
|
|
|
|
Information |
VTL Replication of <vtl name> from source <source ip> failed because VTL replication to this target is not supported |
|
|
|
|
Information |
Wild cards are not allowed in path specification for replication |
|
See Also
