DXi4800 Hard Drive Carrier Indicators

Each DXi4800 hard drive carrier in the Node module has two LED indicators:

LED Indicator	Activity
Drive activity indicator (green)	Flashing - Indicates hard disk drive activity.
Drive status indicator (green and amber)	Off - Drive ready for insertion or removal Note: The drive status indicator remains off until all drives are initialized after system power is applied. Drives are not ready for insertion or removal during this time. Blinks green two times per second - Identify drive/preparing for removal Blinks green, amber, and off - Drive predicted failure Blinks amber four times per second - Drive failed Blinks green slowly - Drive rebuilding Steady green - Drive online Blinks green three seconds, amber three seconds, and off six seconds - Rebuild aborted

Note: If a drive fails, you will be notified by a service ticket in the remote management console (see Service Tickets).

Caution: Do not remove a drive that has not failed. Instead, only remove a drive that has failed. If you accidentally remove a good drive, wait 30 seconds before reinserting the drive.

DXi4800 Hard Drive Carrier LEDs

1 - Drive activity indicator (green)

2 - Drive status indicator (green and amber)