About PTT Configuration
The PTT page allows you to configure the path to tape (PTT) feature of the DXi4700. There are two types of path to tape:
- Backup application specific path to tape allows you to move data from the DXi to physical tape cartridges in an attached physical tape library using an NDMP (Network Data Management Protocol) connection. The DXi supports NDMP V4.
- OST path to tape (also called Direct To Tape) allows you to use Veritas NetBackup to copy LSUs from a storage server on the DXi to a physical tape library.
Additional Information
- Path to tape is available only on the DXi4700 Multi-Protocol configuration.
- DXi4700 Multi-Protocol supports a maximum of three tape devices.
- For information about working with storage servers and LSUs, see OST Configuration.
- NDMP backup jobs can take longer or fail altogether if media and tape drives are not in optimal condition. Replace old media and clean the tape drives in the attached library.
- For detailed information about configuring and using OST path to tape, see the
Best Practices Guides
The following DXi Best Practices Guides are available at www.quantum.com/DXi4700BPG:
- Backup Exec from Veritas
- Data Protector from HP
- Data Protection Manager from Microsoft
- NetBackup from Veritas
- NetWorker from EMC
- Simpana from CommVault
- Tivoli Storage Manager from IBM
- Veeam Backup and Replication
To access the PTT page, click the Configuration menu, and then click the PTT tab.
The PTT page contains the following tabs:
