OMV - GUI Overview

The OMV/GUI is an out-of-the-box NAS solution that everyone can install and administer without needing expert level knowledge of networking and storage systems.

• The system is built on a modular design and can be easily extended with plugins available right after installation of the base system.
• This documentation center provides guidance on using the basics features of the OMV GUI with the R3000.
• For documentation about additional menu options, refer to the OMV open source documentation: https://openmediavault.readthedocs.io/en/latest/

Refer to the following OMV/GUI screen that appears after you login to this interface.

The OMV/GUI allows you to view the following information:

• System
• Storage
• Access Rights Management
• Services
• Diagnostics

During CRU replacement, the OMV/GUI can be used for the following:

• Remotely powering down the R3000 system
• Checking the functionality of replaced parts/CRUs (customer replaceable units)

If you use a laptop/computer to open the OMV/GUI, you need to do the following:

• Reconfigure your laptop/computer's Ethernet port to an address compatible with the customer's network.
• Use an RJ-45 Ethernet cable to connect your laptop/computer to the R3000 GUI port (back of chassis).
• Open the OMV/GUI in a browser by entering the R3000's IP address in the address window.

The defaults for the OMV/GUI is as follows:

• IP Address: 10.0.0.1
• Subnet Mask: 255.255.255.0
• Login: admin
• Password: password

Note: The customer probably has changed all of the defaults after installation of the system. So, you will need to acquire the changed values before you can access the OMV/GUI on your laptop/computer.