View NAS Cluster Information
You can view information about a NAS cluster, including the IP addresses of all nodes, the path to the StorNext file system, node status, whether the NAS VIP has been set, and whether NAS failover has been configured for and NAS NFS cluster.
- Log in to the console command line from the master node. See Access the Console Command Line.
- At the prompt, enter the following:
CLI Example Output from Master Node: SMB NAS Cluster of G300 Appliances Configured for NAS Failover
> nascluster show
NAS Cluster IP: 10.65.188.89/eth0, Master: Yes, SNFS Root: /stornext/snfs1, Joined: Yes
Load balancing: leastconn
Master IP: 10.65.188.89
VIP: 10.65.166.179 active
1: 10.65.188.89 (Joined)
2: 10.65.188.91 (Disabled)
3: 10.65.188.96 (Not-Ready)
The following table presents the different states of nodes.
State Description Enabled
The node is enabled.
The node is joined to the cluster.
A node has been enabled for the NAS cluster, but has not been joined to the cluster.
For master nodes, the node has not been joined to the cluster.
For non-master nodes, the node has been removed from the cluster.