Operate > Configuration Page > Configure SNMP

Configure SNMP

The SNMP tab allows you to configure the Q-Cloud Protect appliance to send status messages using Simple Network Management Protocol (SNMP).

SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network, or communities. SNMP compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters.

You can configure the Q-Cloud Protect appliance to act as an agent and send traps to a specified destination. You can also add SNMP community information.

The Q-Cloud Protect appliance supports SNMP v1 and v2c. To access a copy of the SNMP MIB file, see SNMP MIB File.

Important

If you do not configure SNMP, the cloud appliance will not be able to send status messages.

Tasks

Use the SNMP tab to perform the following tasks:

See Also IconSee Also