Analyzing Network Performance
The Network Analyzer tab allows you to analyze network performance by measuring network throughput between the Q-Cloud Protect appliance and another system, such as an on-site DXi appliance.
In addition, you can enable NetServer from this tab. NetServer must be enabled on the target system to perform network anaylsis.
You can perform that following tasks from the Network Analyzer tab:
- From the Utilities menu, select Analyzer > Network > Performance to display the NetServer Settings page.
- In the Target IP Address box, enter the IP address of the system with which to perform network analysis.
The target system must have NetServer enabled. See The target system must have NetServer enabled. See
.. Enable NetServer
- Click Start.
When the analysis completes, the throughput result displays under Result From Last Run in MB/s.
Note: It takes approximately 5 seconds to refresh the results.