Upgrade to NAS 1.3.0

IMPORTANT

You must be running version 1.2.5 of StorNext NAS before upgrading to StorNext NAS 1.3.0.

After you have upgraded to StorNext NAS 1.2.5, you can perform the StorNext NAS 1.3.0 upgrade.

Prerequisites

  • You must be on StorNext NAS 1.2.5 or later and StorNext 5.3.1 or later to upgrade to the StorNext NAS 1.3.0. See Which Version Am I Running?
  • You need either to be logged in as the NAS sysadmin user or issue the su -sysadmin command to complete the system upgrade.
  • If you are upgrading StorNext NAS offline, you will need to download the upgrade bundle. Contact Quantum Service and Support (http://www.quantum.com/serviceandsupport/get-help/index.aspx#contact-support).
  • You must configure your StorNext NAS server to resolve all IP addresses to hostnames, including the NAS cluster's VIP. Otherwise, the NAS nodes will not be able to recognize other nodes nor the VIP, and the NAS cluster cannot join. For additional information, see Resolve IP Addresses into Hostnames.

Additional Upgrade Information

  • When you upgrade to StorNext NAS 1.3.0, your Samba version will automatically update to version 4.2.
  • Keep in mind that you will perform all StorNext NAS configuration tasks from the console command line. To log in to the console command line for StorNext NAS, see Access the Console Command Line.
  • Each node generally takes less than 5 minutes to complete the upgrade, and in many cases, each node will complete the upgrade between 30 seconds and 1 minute. Because the upgrade process could briefly interrupt access, we recommend performing an upgrade when minimal disruption to file access will occur.