QXS System Serial Number Locations

QXS Storage is used in Xcellis Workflow Director, Xcellis Foundation, aiWARE for Xcellis Embedded (DAE), and Artico (R630) systems.

There are a couple ways to find System Serial Numbers for your QXS chassis:

If you need Quantum support, you will need your system serial number

The system serial number is located on a label attached to the chassis (upper right-hand front corner, top of the chassis) as shown here, outlined in red (12-drive chassis shown):

The following illustration provides a representative example of a serial number label on a chassis.

System serial number in the example: QTMCHOU-12345AB678

In the Disk Storage Management Utility (V3), you will find the system serial numbers for each chassis by doing the following:

  1. Login to the Disk Storage Management Utility (V3).
  2. On the left side of the page, click System, as shown here:

  3. Move your mouse and hover over the image of the chassis you need the serial number for, as shown here:

In the Disk Storage Management Utility (V2), you will find the system serial numbers for each chassis by doing the following:

  1. Login to the Disk Storage Management Utility (V2).
  2. On the left side of the page, cascade open the section for the System Name, the Physical section, and click on the Enclosure number, as shown here (Example: selecting Enclosure 0):

  3. On the right side of the page, under Enclosure Overview, the System Serial Number is called the Midplane Serial Number for the chassis, as shown here: