View SNMP Service Configuration
Before completing the configuration of your SNMP services, you can view all or selected parts of the SNMP service configuration that will be written to the snmpd.conf file.
- Log in to the controller console. See Access the Appliance Controller Console.
- At the prompt, enter the following:
snmp show [service, sysinfo, community, view, trapcommunity, authtrapenable]
The optional parameters are:
Enter to query whether the service is enabled or disabled.
Enter to query system information, such as the administrator and managing device.
Enter to query community information, such as community name and network settings.
Enter to query views set up for the community.
Enter to query the trap community's name.
Enter to query whether the authtrapenable service is enabled.
If you do not enter optional parameters, all of the above parameters will be queried.
> snmp show
SNMP service is enabled
default agent is enabled.
open-manage agent is enabled.
stornext agent is enabled.
# This is the system MIB which gives system information such as uptime
view systemInfo included .22.214.171.124.2.1.1
# This is the IF-MIB branch which gives info on interfaces
view systemInfo included .126.96.36.199.188.8.131.52.0.0.2
# This branch contains networking information
view systemInfo included .184.108.40.206.2.1.4
view systemInfo included .220.127.116.11.4.11.3697.1.50
# UCD-SNMP-MIB system statistic for load
view systemInfo included .18.104.22.168.4.1.2021.10
# UCD-SNMP-MIB system statistic for CPU
view systemInfo included .22.214.171.124.4.1.2021.11
# UCD-SNMP-MIB system statistic for memory
view systemInfo included .126.96.36.199.4.1.2021.4
# UCD-SNMP-MIB system statistic for disks
view systemInfo included .188.8.131.52.4.1.2021.9
view systemInfo included .184.108.40.206.4.1.3697
view systemInfo included .220.127.116.11.4.1.3697.1.50
view systemInfo included .18.104.22.168.4.1.674.10892
rocommunity unguessable default -V systemInfo
authtrapenable is disabled